Home >

Knowledge

11Oct 2022

Use of torque wrench

For safety, it is necessary to ensure that the torque value applied is within the range of the torque equipment, so the maximum range of the wrench should be correctly understood before use, and it is
10Oct 2022

Analysis of the Use of the Liyide Torque Wrench for Automobile Maintenance Tools

Hold the torque wrench correctly to ensure the accuracy of use. When operating the torque wrench, grip the handle and apply force steadily. The operation mode of pulling the wrench is easier to contro
09Oct 2022

Calibration of pneumatic torque wrench and its troubleshooting skills

The change of △ x causes the overall deviation of the indicated value. That is, the indicated value output of the wrench is the same value higher or lower than the nominal value at each point. Here is
08Oct 2022

Composition and principle of pneumatic adjustable torque wrench

Pneumatic torque wrench is a torque wrench with high-pressure air pump as the power source. A torque multiplier with three or more epicyclic gears is driven by one or two powerful pneumatic motors. Th
07Oct 2022

Surface treatment of wrench

Electrophoresis: black, bright, under the effect of external direct current, the charged particles will move directionally towards the cathode or anode under the dispersed medium force to promote the
06Oct 2022

Use and technical characteristics of open-end wrench

Screws are the main fasteners in mechanical equipment. Open end wrenches are important tools for processing, production and maintenance in the machinery industry. This project is a revolution in tradi
05Oct 2022

Hand wrench

The manual wrench, also called ordinary wrench, is mainly used in ordinary life and work.
04Oct 2022

Classification and use of wrenches

There are basically two kinds of wrenches, dead wrenches and monkey wrenches. The former refers to the spanner with fixed number, and the latter is the adjustable spanner. 1. Solid wrench: one end or
03Oct 2022

What is the difference between metric sockets and inch sockets?

The length units are different. The metric system takes mm as the unit and the imperial system takes in. The conversion rate between the two is 25.4:1. 1/16 is generally taken as the basic unit in the
02Oct 2022

Technical features of alloy steel sleeve

The alloy steel sleeve is applicable to the reinforcement connection construction in the reinforced concrete structure of various structures bearing two-way tension and compression.

First 1 2 34 Last 4/4

Tel:+86 539 8392999
Email: info@changlutools.com
Add: NO.19 Feng'an Road, Hedong District, Linyi City, Shandong Province P.R. CHINA

Knowledge

Use of torque wrench

Analysis of the Use of the Liyide Torque Wrench for Automobile Maintenance Tools

Calibration of pneumatic torque wrench and its troubleshooting skills

Composition and principle of pneumatic adjustable torque wrench

Surface treatment of wrench

Use and technical characteristics of open-end wrench

Hand wrench

Classification and use of wrenches

What is the difference between metric sockets and inch sockets?

Technical features of alloy steel sleeve